RUSSELL PERFORMANCE MISCELLANEOUS PARTS
|
 |
|
|
|
CUSHION CLAMPS
For the optimum method of securing hoses to frames or boat runners, mechanics choose Russell Cushion Clamps. The spring steel tab mount with the rubber covered hose loop provides a rigid vibration-absorbing mount for hoses and/or tubing. |
 |
| DESCRIPTION |
PART # |
| Holds -4 AN Hose (10 pcs.) |
650970 |
| Holds -6 AN Hose (10 pcs.) |
650980 |
| Holds -8 AN Hose (6 pcs.) |
650990 |
| Holds -10 AN Hose (6 pcs.) |
651000 |
| Holds -12 AN Hose (6 pcs.) |
651010 |
|
|
PLASTIC AN CAPS
Use these convenient caps and plugs to prevent leaks after disassembly. For temporary use only, remove before vehicle operation. |
 |
| DESCRIPTION |
PART # |
| -3 AN Plastic Cap (10 pcs.) |
645500 |
| -4 AN Plastic Cap (10 pcs.) |
645510 |
| -6 AN Plastic Cap (10 pcs.) |
645520 |
| -8 AN Plastic Cap (10 pcs.) |
645530 |
| -10 AN Plastic Cap (10 pcs.) |
645540 |
| -12 AN Plastic Cap (10 pcs.) |
645550 |
|
|
PLASTIC AN PLUGS
Use these convenient caps and plugs to prevent leaks after disassembly. For temporary use only, remove before vehicle operation. |
|
| DESCRIPTION |
PART # |
| -3 AN Plastic Plug (10 pcs.) |
645501 |
| -4 AN Plastic Plug (10 pcs.) |
645511 |
| -6 AN Plastic Plug (10 pcs.) |
645521 |
| -8 AN Plastic Plug (10 pcs.) |
645531 |
| -10 AN Plastic Plug (10 pcs.) |
645541 |
| -12 AN Plastic Plug (10 pcs.) |
645551 |
|
|
HOSE & FITTING ASSEMBLY LUBE AND SEALANT KIT
Precision Hose and Fitting Assembly Lube allows easy assembly and disassembly of hose ends. Our Assembly Lube will not damage the inner liner of the hose and prevents galling of hose ends during assembly. The Anti-Seize Thread Sealant provides an instant seal on pipe threads and eliminates the use of Teflon® tape. This sealant has a temperature range from -60° to +600º F and can be used as a gasket and flange sealant. |
 |
| DESCRIPTION |
PART # |
| Assembly Lube/Sealant Kit |
671570 |
|
|
RUSSELL SAFETY WIRE
Russell Safety Wire comes in a 1-lb. spool of .32-gauge stainless steel wire, for ease of use. |
 |
| DESCRIPTION |
PART # |
| .032-Gauge Stainless Steel Wire, 1-lb. Spool |
671580 |
|
|
EPOXY CHASSIS PAINT
Russell Epoxy Frame Paint is formulated from the finest paint pigments available. It is combined with a modified formula to produce the same high gloss finish that until now has only been achieved by custom painters. The paint becomes chemically hardened during the drying process to achieve a finish that is highly resistant to both chipping and fuel discoloration. |
 |
| DESCRIPTION |
PART # |
| Black Single Can of Epoxy Chassis Paint |
651441 |
|
|
CENTERBOLT SPARK PLUG WIRE DIVIDERS
These billet aluminum spark plug wire dividers fit 1987 and later small-block GM centerbolt valve covers. They can be used with both front and rear mounted ignition systems and include all the necessary hardware. Available in red, blue or clear anodize. |
 |
| DESCRIPTION |
PART # |
| Spark Plug Wire Divider (Aluminum) |
611146 |
| Spark Plug Wire Divider (Red) |
611147 |
| Spark Plug Wire Divider (Blue) |
611148 |
|
|
CARBURETOR THROTTLE BRACKETS
These adjustable Carb Throttle Brackets fit any brand of 2-bbl. or 4-bbl. carbs and are great when changing to an aftermarket carburetor or for engine and transmission conversions. #611069 has provisions for automatic transmission kick-down cable. |
 |
| DESCRIPTION |
PART # |
| Standard Transmission |
611068* |
| Automatic or Standard Transmission |
611069 |
| *Available while supplies last. |
|
|
PROFESSIONAL ULTRA TECH ENGINE LIFT PLATE
Manufactured from 5/16" aluminum, this plate is rated at 1000 lbs. and works with most 2-bbl and 4-bbl cast iron manifolds with 4500 Series or standard carburetor pads. Includes hardware for attachment to the manifold. Note: Not recommended for use with aluminum intake manifolds. |
 |
| DESCRIPTION |
PART # |
| Ultra Tech Red Anodized Aluminum Engine Lift Plate |
611060* |
| *Available while supplies last. |
|
|
WRAP-IT FOR MAXIMUM WIRE & HOSE PROTECTION
Wrap-It is a self-wrapping, lightweight oversleeve that reduces chafing, cutting and abrading of wires and hoses. The self-wrapping feature allows for quick and easy installation and removal for assembly and/or maintenance without the need for any special tools. |
 |
| DESCRIPTION |
PART # |
| 3/16" Wire and Hose Protection (3' Length) |
629050 |
| 3/16" Wire and Hose Protection (10' Length) |
629060 |
| 5/16" Wire and Hose Protection (3' Length) |
629080 |
| 5/16" Wire and Hose Protection (10' Length) |
629090 |
| 1/2" Wire and Hose Protection (3' Length) |
629110 |
| 1/2" Wire and Hose Protection (10' Length) |
629120 |
| 3/4" Wire and Hose Protection (3' Length) |
629140 |
| 3/4" Wire and Hose Protection (10' Length) |
629150 |
| 1" Wire and Hose Protection (3' Length) |
629170* |
| 1" Wire and Hose Protection (10' Length) |
629180* |
| *Available while supplies last. |
|
|
INNER COILS
These Inner Coils can be inserted into Russell ProClassic Hose to prevent collapsing caused by vacuum, sharp turns, etc. For use with ProClassic Hose, please view ProClassic Section. |
 |
| DESCRIPTION |
PART # |
| -12 AN Inner Coils (4' Length) |
651312 |
| -16 AN Inner Coils (4' Length) |
651316 |
|
)
)
)
)
)
)
)
)
)
)