RUSSELL PERFORMANCE PROCLASSIC FUEL COMPONENTS |
 |
|
|
|
ALUMINUM FUEL LINE ADAPTERS |
 |
| DESCRIPTION |
PART # |
| -6 AN Female Swivel 3/8" Tubing Fuel Line Adapter |
639203 |
| -6 AN Male 37° 3/8" Tubing Fuel Line Adapter |
639213 |
| -8 AN Female Swivel 1/2" Tubing Fuel Line Adapter |
639223 |
| -8 AN Male 37° 1/2" Tubing Fuel Line Adapter |
639233 |
|
|
PUSH-ON EFI FITTINGS (FOR OEM HARD LINES) |
 |
| DESCRIPTION |
PART # |
| -6 AN to 3/8" Hard Tube Push-on EFI Fittings |
640853 |
| -6 AN to 5/16" Hard Tube Push-on EFI Fittings |
640863 |
|
|
FORD EFI FITTINGS |
 |
| DESCRIPTION |
PART # |
| Ford Return Side EFI x -6 AN Fitting |
640873 |
| Ford Pressure Side EFI x -8 AN Fitting |
640883 |
| Ford Pressure Side EFI x -6 AN Fitting |
640903 |
|
|
BANJO FUEL FITTINGS |
 |
| DESCRIPTION |
PART # |
| -6 AN Male Flare for Civics w/ out Fuel Pressure Damper (12mm) |
640913 |
| -6 AN Male Flare for Civics/Integras w/ Fuel Pressure Damper (12 mm) |
640923 |
|
|
FUEL PRESSURE TAKE OFF* |
 |
| DESCRIPTION |
PART # |
| -6 AN Fuel Pressure Take Off (1/8" NPT side port) |
670343 |
| -8 AN Fuel Pressure Take Off (1/8" NPT side port) |
670353 |
|
|
FLARE TO PIPE PRESSURE ADAPTER* |
 |
| DESCRIPTION |
PART # |
| -6 AN to 3/8" Flare To Pipe Pressure Adapter (1/8" NPT side port) |
670063 |
| -8 AN to 3/8" Flare To Pipe Pressure Adapter (1/8" NPT side port) |
670083 |
|
|
6" PROFILTER |
 |
| DESCRIPTION |
PART # |
| -10 AN 6" Anodized Aluminum Fuel Filter with Paper Element |
649250 |
| Replacement Paper Element (10 microns) |
649255 |
| |
|
|
|
COMPETITION FUEL FILTER |
 |
| DESCRIPTION |
PART # |
| -6 AN Male Black Filter (Length: 3" Diameter 1-1/4" ) |
650133 |
| -8 AN Male Black Filter (Length: 3-1/4" Diameter 1-1/4" ) |
650103 |
| Replacement Element (40 Micron) |
651670 |
|
|
8-1/4" PROFILTERS |
 |
| DESCRIPTION |
PART # |
| -6 AN Male Anodized Aluminum With Nylon Element |
649143 |
| -8 AN Male Anodized Aluminum With Nylon Element |
649153 |
|
|
CARB ADAPTER FITTINGS (FOR HOLLEY SINGLE FEED AND DEMON CARBS) |
 |
| DESCRIPTION |
PART # |
-6 AN x 9/16" -24 Male Flare Carb Fitting (2 pcs.)
APPLICATION: Holley Single Feed 600-660 Series, Holley Dual Feed 4010-4011 Series, all Two Barrel Series and Demon with 9/16"-24 thread. |
640203 |
-8 AN x 9/16" -24 Female Flare Extended Carb Fitting (2 pcs.)
APPLICATION: Demon or BG carb with 9/16"-24 thread. Overall length is 3-1/4". |
640773 |
-6 AN x 5/8" -20 (2 pcs.)
APPLICATION: Edelbrock Thunder Series, Performer Series and Carter AFB Carburetors. |
640243 |
|
|
CARB ADAPTER FITTINGS (FOR HOLLEY DUAL FEED AND QUADRAJET CARBS) |
 |
| DESCRIPTION |
PART # |
| -6 AN x 7/8" -20 Male Flare Carb Fitting (2 pcs.) |
640223 |
-8 AN x 7/8" -20 Male Flare Extended Carb Fitting (2 pcs.)
APPLICATION: Holley Dual Feed 750 through Dominator 1350 Series, Quadrajet up to 1974 with 7/8"-20 thread. |
640213 |
-8 AN x 7/8" -20 Female Flare Extended Carb Fitting w/ Reduced Hex
APPLICATION: Holley Dual Feed 750 thru Dominator 1350 Series. Overall length is 2". |
640763 |
|
|
CARB BANJO ADAPTER FITTINGS (FOR EDELBROCK AND CARTER AFB CARBS) |
 |
| DESCRIPTION |
PART # |
-6 AN x 5/8" -20 Banjo Carb Fitting/Hose End
APPLICATION: Edelbrock Thunder Series, Performer Series and Carter AFB carburetors with 5/8"-20 thread. Banjo fitting assembles directly to hose. |
640273 |
|
|
CARB BANJO ADAPTER FITTINGS (FOR HOLLEY SINGLE FEED AND DEMON CARBS) |
 |
| DESCRIPTION |
PART # |
-6 AN x 9/16" -24 Banjo Carb Fitting/Hose End
APPLICATION: Holley Single Feed 600-660 Series, and all two barrel series with 9/16" - 24 thread. Banjo fitting assembles directly to -6 hose. |
640233 |
|
|
PROCLASSIC CARB KITS (FOR HOLLEY 4150 SERIES) |
 |
| DESCRIPTION |
PART # |
-6 AN Without Gauge 1/8" Pipe Plug
APPLICATION: These Dual Inlet Kits do not fit Holley 4010 or 4011 Series carbs. |
641093 |
|
|
PROCLASSIC CARB KITS (FOR DUAL-INLET DEMON) |
 |
| DESCRIPTION |
PART # |
| -6 AN Without Gauge 1/8" Pipe Plug |
641253 |
|
|
PROCLASSIC CARB KITS |
 |
| DESCRIPTION |
PART # |
| -8 AN Inlet Without Filter |
641153 |
|
|
UNIVERSAL FUEL PUMP TO CARBURETER KITS
|
 |
| DESCRIPTION |
PART # |
| Universal fuel pump to carb. Tube seal ends. (3 ft. length) |
641053 |
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
