Edelbrock Performer Dry Nitrous Systems
Edelbrock Nitrous Systems are dyno-tested and calibrated to deliver accurate and safe horsepower gains with even distribution to each cylinder. Our nitrous calibrations are determined through dyno-testing, not simple mathematical formulas, which do not take into account real-world variables. Edelbrock Nitrous Systems and components are the quickest and easiest way to get large horsepower increases with a minimum of engine modifications and expense. Developed with famed motorcycle racer Dave Schnitz, the Performer Dry Nitrous System is a universal system for use on all 4-cylinder sportbikes with EFI. It delivers nitrous directly into the airbox and extra fuel is supplied through the injectors by the use of a Dynojet Power Commander, making this the safest and most reliable way to get big power gains. This system is very easy to install and comes with all of the necessary components for a safe and clean installation (except the Power Commander and bottle brackets).
- 1-lb. 3 oz. Nitrous Bottle (Empty)
- Fan Spray Dry Nozzle
- Stainless Steel Nitrous Solenoid
- Quality Steel Braided Hose
- Aircraft Quality AN Fittings
- 3 Jet Sizes (.028", .034" & .036")
- Hardware and Instructions for Complete Installation
- BRACKETS NOT INCLUDED
 |
|||||
| Description | Part # | ||||
| Performer Dry Nitrous Systems (Universal for Sport Bikes) .....NEW | 71940 | ||||
|
|||||
| Description | Part # | ||||
| Bracket for 2-lb. Bottle | 72664 | ||||
| Bracket for 12 oz. Bottle | 72665 | ||||
| 2 lb. Bottle Clamp Outer | 72661 | ||||
| 2 lb. Bottle Clamp Inner | 72662 | ||||
|
|||||
| Description | Part # | ||||
| For 1-1/8" diameter frames | 72666 | ||||
| For 1-1/4" diameter frames | 72667 | ||||
| For 1-1/2" diameter frames | 72668 | ||||
| For 1-3/8" diameter frames | 72669 | ||||
 |
© 2007 Russell Corporation, an Edelbrock Company.
