Warranty Information | Installation & Tech
Brake Components Oil Lines Fuel Components Sportswear, ETC.
Dealer Info Decals, Clothing, And Accessories
DUAL DISC BIKE PLAN-O-GRAM

This display contains all the brake line parts needed to switch from stock lines to performance braided lines for any dual disc bike application. Includes silkscreened color display board, hooks and Cycleflex pre-assembled stainless braided lines with clear coat and individual chrome adapter fittings.
 
PART NO. DESCRIPTION QUANTITY
R4047C 10mm Straight Banjo 2
R4050C 10mm 35º Banjo 2
R4051C 10mm 90º Banjo 2
R4052C 12mm Straight Banjo 2
R4053C 12mm 35º Banjo 2
R4295C "Flat Style" Brake Tee 2
R4296C "Bubble Style" Tee 2
R40509 3/8" -24 Chrome Banjo Bolt 4
R40515 7/16" -24 Chrome Banjo Bolt 2
R40517 3/8" -24 Chrome Double Banjo Bolt 2
R59010S 17" Upper Hose with 10mm Banjo 2
R59020S 18" Upper Hose with 10mm Banjo 2
R59030S 19" Upper Hose with 10mm Banjo 2
R59040S 21" Upper Hose with 10mm Banjo 2
R59050S 23" Upper Hose with 10mm Banjo 2
R59060S 25" Upper Hose with 10mm Banjo 2
R59200S 15" Lower Hose with straight and 90º Banjos 4
R59210S 17" Lower Hose with straight and 90º Banjos 4
R59220S 18" Lower Hose with straight and 90º Banjos 4
R59230S 19" Lower Hose with straight and 90º Banjos 4
 
SPEED BLEEDER® MERCHANDISER

Speed Bleeder Merchandiser #R87003 is an attractive countertop display for dealers to showcase the patented Speed Bleeder. The merchandiser contains ten packages of Speed Bleeders and three bottles of Russell DOT 5 Brake Fluid. Go to the Complete Brake & Plumbing Guide on pages 12-19 for the correct part number for stock calipers. #R87003 SPEED BLEEDER® MERCHANDISER INCLUDES:

PART NO. DESCRIPTION QUANTITY
R40525 1/4-28 Threads 3
R40526 3/8-24 Threads 7
R71440-1 Dot 5 Brake Fluid, 12 oz. bottle 3
 
HOW TO SELECT DUAL DISC BRAKE LINES

Step 1: LOWER HOSES - 2 required:
Simply select the pre-made lengths needed between 15" and 19".
Step 2: UPPER HOSE - 1 required:
Pre-made with one universal end to fit. Select the length needed.
Step 3: FITTINGS - 5 required:
First, select (1) 10mm or 12mm banjo to fit the master cylinder (straight, 35º or 90º) and (1) 3/8"-24 or 7/16" -24 single banjo bolt, then add the following: (1) 3/8" -24 double banjo bolt and (3) 3/8" -24 banjo bolts.
Step 4: JUNCTION BLOCK - 1 required:
Select either the bubble style or flat style tee.
 
© 2007 Edelbrock Corporation