Pro System II Hose & Hose Ends By Russell Performance


PRO SYSTEM II NYLON HOSE
This semi-rigid, nylon tubing is ideal for the custom bike builder who wants to fabricate their own brake hoses. Pro System II hose allows for maximum flexibility and the nonabrasive, small diameter hose won’t scratch your custom paint job. Rated at 1200 PSI. Does not meet D.O.T. specifications. Use with Pro System II chrome or black hose ends.
Pro System II Nylon Hose by Russell Performance Products
Size Length Part #
Pro System II Nylon Black Hose 3/16” 25’ R3134
Pro System II Nylon Black Hose 3/16” 50’ R3135

PRO SYSTEM II UNIVERSAL HOSE KIT
This Pro System II Universal Upper Hose Kit is for 2008 & Up FL Series w/ ABS applications.

    Features Include:
  • Makes handlebar swaps on 08-11 FLHT, FLHR, FLHX and FLTR ABS models a breeze
  • 8' of black Pro System II brake tubing, 2-chrome Pro System banjos & sealing washers are included
  • Fabrication combined with maximum flexibility is allowed
  • Features a non-abrasive finish that will not harm painted surfaces
  • Upper hose only
  • Not DOT approved, for show and off-road use only
Pro System II Universal Upper Hose Kit For 2008 & Up FL Series w/ ABS by Russell Performance Products
Size Length Part #
Pro System II Universal Upper Hose Kit For 2008 & Up FL Series w/ ABS R031503

PRO SYSTEM II COMPRESSION HOSE END FITTINGS
Pro System II chrome and black plated compression end fittings are simple to assemble on the Pro System II nylon hose. Seven choices are available for connections to any master cylinder or caliper.
Pro System II Compression Hose End Fittings by Russell Performance Products
Description Qty Chrome Black
3/8” - 24 Male Compression Fitting 1 R4342C R43423B
7/16” - 24 Male Compression Fitting 1 R4343C R43433B
1/8” Pipe Male NPT Compression Fitting 1 R4340C R43403B
90° 1/8” Male NPT Compression Fitting 1 R4341C R43413B
-3 Female Hose End Part # R4344C Use with Adapter Fittings 1 R4344C R43443B
10mm (3/8”) Straight Banjo 1 R4345C R43453B
7/16” Straight Banjo 1 R4346C R43463B
10mm (3/8”) Straight Banjo 35° 1 R4347C R43473B
7/16” Straight Banjo 35° 1 R4348C R43483B

PRO SYSTEM II REPLACEMENT PARTS
Pro System II Replacement Parts by Russell Performance Products
Description Qty Part #
10mm (3/8”) Replacement Sealing Washers 10 R49005
7/16” Replacement Sealing Washers 10 R49006
5/16” Replacement Ferrule 10 R49009

Edelbrock Tech Note TECH NOTES: How to assemble Pro System I Fittings

How to assemble Pro System II Fittings

1. Cut hose to desired length using a knife.
2. Disassemble the 3-piece adapter fitting.
3. Slide the tapered end (taper first) onto the hose.
4. Slide the brass ferrule, with tapered end going towards the end of the hose.
5. Push hose into the body until it bottoms out, then bring the tapered nut forward and tighten down.

Note: To re-use Compression fittings, you need a 5/16” Replacement Ferrule #R49009.