Lunati HOT Summer Deals on Valve TrainShop Now

Performer RPM Ford FE 390 Intake Manifold

Edelbrock Performer RPM 390 Intake Manifold for 1958-1976 Ford 332-428 FE Big-Block V-8
In stock
Edelbrock Part # 7105 Performer RPM FE intake manifold is designed for high-performance street 390-406-410-427-428 c.i.d. Ford FE V8's with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area design builds low and mid- range acceleration while optimized runner paths make exceptional top-end horsepower. Has provision for adding the PCV or breather flange at rear. No exhaust crossover passage.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347071050
Series Performer RPM
Gasket Or Seal Included No
Vehicle Model Ford
Availability Note Available to Order
Warranty 12 Months
RPM Range 1500-6500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • Recommended intake gasket: Edelbrock # 7224
  • Manifold height: A-4.89", B-6.04"
  • Carb pad height: 5.46"
  • Carb recommendations: Edelbrock Thunder Series AVS or Performer Series 650-800 cfm. For automatic transmissions use # 1483 or # 1844
  • Port exit dimensions: 1.16" x 1.97"
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
  • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 6.040 in
Single Or Dual Plane Type Dual