Performer RPM Small Block Chevy Intake Manifold

The Edelbrock Performer RPM #7101 intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high-performance street/marine engines. The Edelbrock Performer RPM #7101 are dual-plane, high-rise intakes with a 180-degree firing order to produce incredible top-end horsepower while retaining good throttle response. Provides power like a single-plane and throttle response like a dual-plane. The larger plenum and runners match the free flowing exhaust, high-lift cams and other modifications of a high output engine. The Edelbrock Performer RPM #7101 is intended for high-performance street or competition engines that run up to 6500 rpm. The Edelbrock Performer RPM gives you the ultimate in street high-performance. Has provisions to machine for an oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads. Intake manifold will not fit under stock Corvette hood. The Edelbrock Performer RPM #7101 also features a natural aluminum finish for a classic look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Recommended intake gasket: Edelbrock #7201
• Manifold ht: A-4.20", B-5.25" (.70" taller than #2101)
• Carb pad height: 4.27"
• Port exit dimensions: 1.16" x 1.92"
• Has an unmachined boss for oil fill tube
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
• Will not fit under stock Corvette hood.