Victor Jr Holden EFI Intake Manifold

The Edelbrock Victor Jr. Holden #28945 EFI intake manifold is for use with competition 355+ c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. The Victor Jr. Holden is a single-plane design that is tuned for maximum air flow from 3500 to 7500 rpm. It features a taller design with long tapered runners for a broad operating rpm range. Will fit both stock 1988-1998 EFI style cylinder heads and the Edelbrock Holden VN RPM cylinder heads. It also features a 4150 flange for use with square-bore carburetors and throttle bodies. Includes extra material for porters to modify for use with 4500 series applications. The water outlet is machined for use with a small-block Chevy waterneck. The Edelbrock Victor Jr. Holden #28945 also features a natural aluminum finish for a classic look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Recommended intake gasket: stock gasket set or equivalent
• Match with Edelbrock fuel rail kit #3504
• Manifold Dimensions: Manifold height: A-6.95”, B-6.95”
• Carb pad height: 6.95”. Port exit dimensions: 1.18” x 2.02”
• Includes extra material for porters to modify for use with 4500 series applications.
• Has 4150 throttle body flange
• Fuel Rail Notes: Standard injectors measure 2.50" from the o-ring center to o-ring enter. Ends are tapped for use with
-6 AN fittings.
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.